At Zimmer and Peacock we provide everything to get started on integrating a pH sensor into your application, technology, market or research.
In this video we show you how to run your first pH sensor from Zimmer and Peacock.
What you will need as a minimum is:
1) AnaPot Potentiostat.
2) Zimmer and Peacock pH.
3) pH Calibration Solutions.
Zimmer and Peacock is a very friendly company so if you have any questions please don't hesitate to contact us.
If you are not using the AnaPot then you will need to measure the open circuit potential/voltage between the sensing electrode and the auxiliary electrode.
If you don't have suitable connectors or cables please see the buttons below.