ezeSCAN5

The ezeSCAN5 is specifically designed for University and Analytical Laboratories where more complex potentiostats are usually not required.

The easy to use PC based software for setup, graphical display and analysis, whilst simply connecting to your PC via a USB cable.

 

The potentiostat is offered at a competitive  price, and comes with 4 user selectable current ranges of 1, 10, 100 and 1000 microamps, which can either be set manually or automatically controlled.

 

SPECIFICATIONS

  • Applied potential:+/- 2V
  • Compliance voltage +/-5V
  • Max applied current:1 mA
  • Max scan rate:10,000 mV per second
  • Applied output resolution: (V&I) 1mV & 1 µA
  • Measured input resolution (V&I):0.1 mV & 20 pA
  • Reading intervals:1,5,10, 60, 120, 300, 600 second
  • Number of readings; 1 to 10000

 

TECHNIQUES AND OPTIONS

The instruments can either be powered by batteries or by a mains adapter.

Techniques include: Cyclic Voltammetry, Linear Sweep Voltammetry, Chronoamperometry, Square Wave Voltammetry, Differential Pulse Voltammetry, ASV and CSV. 

 

ezeSCAN5

ezeSCAN5

1.900,00 €

  • Available
  • Generally ships within 3-4 weeks

Cyclic Voltammetry

 

+/- 2.0V start and end potential  

 

1 mV/sec to 10V/sec scan rate

 

1 to 10 cycles (0 - 1000 seconds delay between cycles)

 

1,2,5,10 mV potential steps

 

1 - 1000 millisec sample intervals

 

 

 

Linear Sweep Voltammetry

 

+/- 2.0V start and end potential  

 

1 mV/sec to 10V/sec scan rate

 

1,2,5,10 mV potential steps

 

1 - 1000 millisec sample intervals

Chronoamperometry(fast)

 

+/- 2.0 V applied potential

 

5,10,20,50,100,500,1000 millisecs reading intervals

 

1 to 1000 readings

 

 

Chronoamperometry(slow)

 

+/- 2.0V applied potential

 

1,5,10,30,60,300,600 second reading intervals

 

1 to 5000 readings

 

 

Square Wave Voltammetry

 

+/- 2.0V start and end potential  

 

10 mV/sec to 10V/sec scan rate

 

1,2,5,10, 20 mV potential steps

 

10 - 500 Hz sampling  

 

5 - 200 mV amplitude

Differential Pulse Voltammetry

 

+/- 2.0V start and end potential  

 

10 mV/sec to 10V/sec scan rate

 

1,2,5,10, 20 mV potential steps

 

5 - 500 millisec pulse width

 

5 - 200 mV amplitude

 

 

 

Anodic Stripping Voltammetry

 

+/- 2.0V conditioning potential  

 

1 second to 30 minutes conditioning/depostion  time

 

 

 

Cathodic Stripping Voltammetry

 

+/- 2.0V conditioning potential  

 

1 second to 30 minutes conditioning/deposition time