Cables from ZP for screen printed electrodes and biosensors

We have a variety of cables and connectors we have been working with over the years for different applications. Contact us if your application requires a different connector than listed on this page or in our webstore. Don't hesitate to reach out to us if you would like some help deciding which cable is the better fit. 

 


Standardized cables


 

We have worked with a variety of different cables and connectors over the years. Our most valued cables can be found in our webstore. Click the buttons below for cables and connectors:

 

NOTE - We are using gold platted and spring loaded banana plugs with our cables to give the best quality data. The cables are 80 cm long

 


BNC cables and others


ZP4000659 - SPE7-BNC-CABLE

 ZP cable BNC to 7 mm SPE/biosensor cable

225,00 €

ZP4000660

SPE10-BNC-CABLE - ZP cable BNC to 10 mm SPE/biosensor cable

225,00 €


ZP4000658 - LM4-WIRE SENSOR CONNECTOR

 This cable is to go between ZP's wire electrodes and the AnaPot and can be used with ZP's small rodent harness

 

 

225,00 €

  • Available
  • Generally ships within 3-4 weeks

LM5 - WIRE SENSOR CONNECTOR

 This cable is to go between ZP's wire electrodes and the AnaPot and can be used with ZP's small rodent harness

 

 

225,00 €

  • Available
  • Generally ships within 3-4 weeks

Customized cables


CUSTOMISED CABLE - LM4

 This cable is to go between an AnaPot and a undefined connector

 

 

450,00 €

  • Available
  • Generally ships within 3-4 weeks

CUSTOMISED CABLE - LM5

 This cable is to go between an AnaPot EIS and a undefined connector

 

 

450,00 €

  • Available
  • Generally ships within 3-4 weeks